Introduction

1. Core Working Principles of Plastic Crushers

1.1 Mechanical Design Fundamentals

• Power Source: Electric motors (3–200 kW) drive the crushing mechanism, with power requirements depending on material hardness and capacity.
• Crushing Chamber: The enclosed space where 破碎 (crushing) occurs, lined with wear-resistant materials to withstand friction.
• Cutting/Shredding Mechanism: Blades, claws, or shafts that interact with the material to break it down.
• Screening System: Controls particle size by allowing only fragments smaller than the 筛网 (screen mesh) to exit.

2. Types of Plastic Crushers and Their Working Principles

2.1 Blade Crushers: Shearing Action for Hard Plastics

Key Components:

• Stationary & Rotating Blades: 8–20 sharp blades (SKD11 steel or YG8 carbide) mounted on a rotor, with fixed blades (定刀) on the chamber walls.
• Screen Mesh: Perforated plate at the bottom of the chamber, with holes ranging from 8–30 mm to control output size.
• Motor & Transmission: High-speed motor (200–800 RPM) connected via belts or direct drive to the rotor.

Working Process:

1. Material Feeding: Waste plastic (e.g., PET bottles, ABS trimmings) is fed into the chamber via a hopper.
2. Shearing Mechanism:
   • The rotor spins, causing rotating blades to shear material against stationary blades, creating a scissor-like action.
   • Hard plastics are cut into small pieces as they pass through the blade gap (0.5–2 mm).
3. Screening & Discharge:
   • Particles smaller than the screen mesh fall through to the output conveyor.
   • Oversized fragments are re-crushed until they meet the desired size.

Advantages:

• Precision: Produces uniform particles (size error ≤±2 mm), ideal for high-quality recycling.
• Efficiency: High-speed operation reduces processing time for hard, brittle materials.
• Flexibility: Adjustable screens allow quick switching between particle sizes for different applications.

Application Example:

2.2 Claw Crushers: Impact and Tearing for Soft, Flexible Plastics

Key Components:

• Claw Assembly: 6–12 pairs of curved claws (high-manganese steel or Teflon-coated) mounted on a rotor, with spacing of 8–15 mm to prevent material jams.
• 导流板 (Deflector Plates): Guide flexible materials toward the claws and away from the rotor shaft.
• High-Speed Motor: Operates at 1,500–3,000 RPM to generate centrifugal force for tearing.

Working Process:

1. Material Introduction: Soft materials (e.g., agricultural film, plastic bags) are fed into the chamber.
2. Impact & Tearing:
   • Rapidly rotating claws strike and grab the material, tearing it into smaller pieces through impact and tension.
   • Centrifugal force throws materials against the chamber walls for additional fragmentation.
3. Anti-Entanglement Design:
   • Claw spacing and deflector plates prevent thin films from wrapping around the rotor, a common issue in traditional crushers.
4. Discharge: Crushed particles pass through a screen (10–20 mm mesh) for uniform output.

Advantages:

• Anti-Entanglement: Ideal for fibrous or wet materials (up to 20% moisture content).
• High Throughput: Handles large volumes of lightweight materials efficiently.
• Low Maintenance: Modular claw design allows quick replacement and reduced downtime.

Application Example:

2.3 Dual-Shaft Shredders: High-Torque Crushing for Large, Composite Materials

Key Components:

• Twin Shafts: Two horizontal shafts with interlocking teeth (高铬铸铁 or carbide alloy), rotating in opposite directions (speed difference of 5–10%).
• Hydraulic System: Provides overload protection, retracting shafts if metal or hard contaminants are detected.
• Large Inlet Hopper: Accommodates materials up to 1,500 mm in size, eliminating the need for pre-cutting.

Working Process:

1. Feeding Large Materials: Items like pallets or bumpers are loaded into the hopper via a conveyor or forklift.
2. High-Torque Crushing:
   • Counter-rotating shafts grip the material, using shear and compression to break it into 30–50 mm fragments.
   • The speed difference between shafts increases mechanical stress, ideal for tough or composite materials.
3. Contamination Protection:
   • Hydraulic sensors detect non-plastic materials (e.g., metal bolts in pallets), reversing shaft rotation to eject contaminants without damage.
4. Secondary Crushing (Optional):
   • Oversized fragments may pass to a secondary crusher (e.g., blade crusher) for further size reduction.

Advantages:

• Heavy-Duty Capability: Handles materials with metal inclusions or high impact resistance.
• Low Energy Consumption: High torque at low RPM reduces motor load compared to high-speed crushers.
• Safety: Hydraulic protection minimizes damage from foreign objects.

Application Example:

3. Key Differences in Working Principles by Material Type

4. Factors Influencing Crusher Performance

4.1 Material Properties

• Hardness: Hard plastics (e.g., PET) require sharp blades and tight blade gaps, while soft materials (e.g., PE) need high-speed claws to prevent sticking.
• Moisture Content: Wet materials (e.g., washed film) demand rust-resistant components (304 stainless steel screens, Teflon coatings).
• Size/Thickness: Large items (pallets) need wide inlets and high-torque shafts, while thin films require anti-entanglement designs.

4.2 Operational Parameters

• Rotor Speed: High speed (2,000 RPM for claws) for soft materials; lower speed (200 RPM for dual shafts) for large, tough items.
• Blade/Claw Clearance: Adjusted based on desired output size (smaller gaps for finer particles).
• Screen Mesh Selection: Matching screen size to downstream processes (e.g., 10 mm for spinning into fibers, 20 mm for injection molding).

4.3 Maintenance and Wear

• Blade/Claw Replacement: Regular sharpening or replacement (every 500–1,500 hours, depending on material abrasiveness).
• Lubrication: Maintaining bearings and shafts to prevent overheating and mechanical failure.

5. Real-World Applications and Optimization

5.1 Case Study: PET Bottle Recycling Line

• Crusher Type: Blade crusher (15 mm screen, 75 kW motor).
• Process:
  1. Bottles fed into the crusher, sheared into 12–15 mm flakes.
  2. Screens remove oversize pieces for re-crushing.
  3. Output used directly in polyester fiber production.
• Optimization: Installing a pre-washing system reduces blade wear from dirt, extending blade life by 20%.

5.2 Case Study: Agricultural Film Recycling

• Crusher Type: Claw crusher (2,500 RPM, Teflon-coated claws).
• Process:
  1. Wet, sandy film fed into the chamber, claws tear it into 15 mm pieces.
  2. Deflector plates prevent film from 缠轴 (wrapping around shafts).
  3. Output cleaned and pelletized for reuse in plastic lumber.
• Optimization: Using a variable frequency drive (VFD) adjusts speed based on film thickness, reducing energy use by 15%.

6. Common Questions About Crusher Mechanics

6.1 Why Do Soft Materials Require Different Crushers?

6.2 How to Choose Between a Blade Crusher and a Shredder?

• Blade Crushers: Use for hard, brittle plastics needing precise particle size (e.g., PET, ABS).
• Dual-Shaft Shredders: Use for large, tough items (pallets, bumpers) or composite materials with contaminants.

6.3 Can One Crusher Handle Multiple Material Types?

7. Innovations in Crusher Technology

7.1 Smart Crushers with IoT Monitoring

7.2 Energy-Efficient Designs

• Direct Drive Motors: Eliminate belt losses, improving energy efficiency by 10–15%.
• Regenerative Braking: Captures energy during start/stop cycles, reducing power consumption in large-scale operations.

7.3 Modular Design for Quick Maintenance

Conclusion